Laguna Blog

Stay Up To Date

Topic: Cnc

How To Make a Wine Rack With Your CNC Machine
By George Vondriska on June 28, 2022

Give your bottles of wine a special place by making this wine rack with your CNC router.  It’s made from ½” plywood, has an epoxy accent and relies...

Continue Reading
CNC: Create Interlocking Joints
By George Vondriska on May 25, 2022

This style of woodworking joint goes by a few different names; cross lap, cross halving, half lap… But no matter what you call it this is a great...

Continue Reading
CNC A Live Edge Desk Tray Organizer
By George Vondriska on May 11, 2022

If you need a little help keeping your desk organized this project is right up your alley. It’ll store your phone, pens, flash drives, SD cards…....

Continue Reading
A Step-By-Step Of Sheet Engraving On A CO2 Laser
By Jim Diederich on May 4, 2022

Often times I get orders for small items, but a large quantity. Depending on how many individual items the order is for, I will sometimes make a...

Continue Reading
CNC: Feed Through Tiling for Large Projects - Tiling and Machining the Workpiece
By George Vondriska on April 20, 2022

You can easily machine workpieces that are significantly longer than your CNC router by using Feed Through tiling. For the design and toolpath...

Continue Reading
CNC: Feed Through Tiling for Large Projects - Design and Toolpaths
By George Vondriska on April 13, 2022

As you consider projects you want to do on your CNC router remember that your capacity is only limited in one direction, the width of the gantry....

Continue Reading
CNC Files, Programs, and Prep, Oh My!
By Jim Diederich on March 23, 2022

Working on a CNC laser is a lot of fun, and the variety of projects you can make are vast. When preparing to make something, it is very important to...

Continue Reading
CNC Tic Tac Toe
By George Vondriska on March 16, 2022

Here’s a simple project that’s easy and fun to make, and to play. If you’ve got kiddos around the house, they’ll enjoy playing this with you. This is...

Continue Reading
CNC Router or Laser: How To Get Started
By Jim Diederich on March 9, 2022

I often get asked by people looking to get started in CNC (computer numerical control) work, which kind of machine they should buy and why? This is...

Continue Reading
Flycut Your Spoilboard
By George Vondriska on March 2, 2022

The spoilboard on your CNC needs to be dead flat, unlike this one. As you use your machine and do through cuts on projects you’ll cut (slightly) into...

Continue Reading

Subscribe and stay up to date