Laguna Blog

Stay Up To Date

Topic: Cnc

How to Make an Outdoor Wood Sign
By George Vondriska on September 28, 2022

Intersted in making a painted sign? This 1-1/2” x 24” x 36” sign was made on a CNC. A number of steps were done to get this result, from glueing to...

Continue Reading
How To Create A Textured Sign With A CNC Machine
By George Vondriska on September 7, 2022

Creating a raised letter sign with a textured background is an easy tasks to do when using V-Carve Pro and your CNC router. Not only does the...

Continue Reading
Calibrate Your CNC Touch Plate For Best Results
By George Vondriska on August 17, 2022

Touch plates, also known as pucks, are commonly used to set the Z-zero on CNC routers. The concept is simple. When the machine is told to do so, the...

Continue Reading
CNC Tips: How to Flycut Wood
By George Vondriska on August 15, 2022

Fly cutting is a very important maintenance task that you need to do, but it can be used for more than just leveling your spoilboard. This burr oak...

Continue Reading
How to Create a Perfect Stencil with a CNC Router
By George Vondriska on July 20, 2022

Grab a plastic sign from your local hardware store, install a dragknife on your CNC router, and you can easily create your own stencils.

Continue Reading
How To Make a Wine Rack With Your CNC Machine
By George Vondriska on June 28, 2022

Give your bottles of wine a special place by making this wine rack with your CNC router.  It’s made from ½” plywood, has an epoxy accent and relies...

Continue Reading
CNC: Create Interlocking Joints
By George Vondriska on May 25, 2022

This style of woodworking joint goes by a few different names; cross lap, cross halving, half lap… But no matter what you call it this is a great...

Continue Reading
CNC A Live Edge Desk Tray Organizer
By George Vondriska on May 11, 2022

If you need a little help keeping your desk organized this project is right up your alley. It’ll store your phone, pens, flash drives, SD cards…....

Continue Reading
A Step-By-Step Of Sheet Engraving On A CO2 Laser
By Jim Diederich on May 4, 2022

Often times I get orders for small items, but a large quantity. Depending on how many individual items the order is for, I will sometimes make a...

Continue Reading
CNC: Feed Through Tiling for Large Projects - Tiling and Machining the Workpiece
By George Vondriska on April 20, 2022

You can easily machine workpieces that are significantly longer than your CNC router by using Feed Through tiling. For the design and toolpath...

Continue Reading

Subscribe and stay up to date