Just in time for Halloween, here’s how to convert pumpkin clipart from the internet to vectors that you can cut on the CNC. And, by choosing...

Breathing wood dust is a known health hazard, so as woodworkers we owe it to ourselves and our families to invest in proper dust collection. There

The ceramic guide system is the primary reason I selected the 1412 bandsaw. With 5 ceramic points of contact above the table, and 5 points of...

If you have a router table and a tongue and groove router bit set you can easily make frame and panel doors. It’s a simple process and creates a...

Many years ago I received an order from a client for a serving tray, and she wanted the popular style where you start with a thick plank and dish...

I’ve been using a simple box joint jig for the last 10 years. Calling my old jig simple is an understatement – it was just two scraps of plywood...

I love using this joint on drawers. It’s so fast! With one set up you’ll cut the corner joint and the groove for the drawer bottom. This works...

Woodturners have a powerful craving for beautiful burls. We can’t walk through the forest, or heck, even drive down the road without being...

It’s easy to add a weave pattern to a frame using VCarve Pro to design your CNC project. There are different weaves available, and you can resize...

Getting into wood turning doesn’t have to be complicated or difficult. Consider turning a few mallets in different sizes and weights for chisel...