Laguna Blog

Stay Up To Date

Topic: Cnc Technology

Calibrate Your CNC Touch Plate For Best Results
By George Vondriska on August 17, 2022

Touch plates, also known as pucks, are commonly used to set the Z-zero on CNC routers. The concept is simple. When the machine is told to do so, the...

Continue Reading
How To Build A Cutting Board Out Of Exotic Wood
By Kayla Russell on July 14, 2022

The world of woodworking is vast and full of unlimited possibilities for beginners and seasoned woodworkers alike. That being said, where do you...

Continue Reading
DIY Leather Plane Holder Using a CNC Drag Knife
By George Vondriska on July 8, 2022

Now that you know what a Drag Knife is, let’s do a project and put a drag knife to use.  Be sure you follow the recipe in previous article about the...

Continue Reading
Engraving Glass With A CO2 Laser
By Jim Diederich on May 18, 2022

The Laguna CNC laser is a unique tool in that it can work on many different types of products. I personally do a lot with wood, and some with...

Continue Reading
CNC: Feed Through Tiling for Large Projects - Design and Toolpaths
By George Vondriska on April 13, 2022

As you consider projects you want to do on your CNC router remember that your capacity is only limited in one direction, the width of the gantry....

Continue Reading
How To Carve A Pumpkin On A CNC Router
By George Vondriska on October 13, 2021

Just in time for Halloween, here’s how to convert pumpkin clipart from the internet to vectors that you can cut on the CNC. And, by choosing...

Continue Reading
CNC: How To Engrave a Glass Block
By George Vondriska on September 1, 2021

CNC routers aren’t just for cutting wood and plastics. You can also use your CNC to engrave, like the dream catcher artwork on this glass block

Continue Reading
CNC: Make a Custom Plaque
By George Vondriska on August 18, 2021

You can easily produce custom plaques on your CNC router. This one will end up on a horse stall. I’m sure Sonny will appreciate it. :)  VCarve Pro 10...

Continue Reading
Adding Fonts To VCarve Pro
By George Vondriska on August 4, 2021

Computers inherently come with a lot of fonts, but if you get into a specialized project you might find that VCarve Pro doesn’t have the font you...

Continue Reading
Level an Epoxy Pour on your CNC
By George Vondriska on June 23, 2021

Working with epoxy is all the rage right now, and it’s common to pour epoxy alongside a piece or two of wood. You can easily level the resulting...

Continue Reading

Subscribe and stay up to date