Laguna Blog

Stay Up To Date

Topic: How To

The Basics to Cabinet Making
By Willie Sandry on November 16, 2022

Rabbets RuleIn the world of cabinetry, there’s no quicker or easier joint than a rabbet. Cabinet makers rely on them as a bread and butter joint used...

Continue Reading
Jigs and Mods To Get the Most Out Of Your Tools
By Willie Sandry on October 26, 2022

Having the right tool is great when starting a woodworking project, but having the right tool and perfect set up is even better.

Continue Reading
Quick Breakdown On Why You Need A Laguna Jointer
By Willie Sandry on October 12, 2022

Woodworking jointers are one of those tools you didn't know you needed, until you have it. A jointer is the machine of choice to use when in need to...

Continue Reading
How to Make an Outdoor Wood Sign
By George Vondriska on September 28, 2022

Intersted in making a painted sign? This 1-1/2” x 24” x 36” sign was made on a CNC. A number of steps were done to get this result, from glueing to...

Continue Reading
Tips On How To Make An End Grain Cutting Board
By Willie Sandry on September 15, 2022

A cutting board might be one of the very first projects you tackle as a woodworker, but have you ever made an end grain cutting board? They make an...

Continue Reading
How To Create A Textured Sign With A CNC Machine
By George Vondriska on September 7, 2022

Creating a raised letter sign with a textured background is an easy tasks to do when using V-Carve Pro and your CNC router. Not only does the...

Continue Reading
Eight Key Fundamentals Woodworkers Must Know
By Willie Sandry on August 31, 2022

1. Mortise before TenonIt’s the quintessential order of operations in woodworking, and it’s nearly always true. Usually, you’ll cut the mortise...

Continue Reading
Simple Hacks to Common Woodworking Mistakes
By Willie Sandry on August 24, 2022

Sometimes mistakes happen. No matter how careful you are, if you’ve been a woodworker for a while, you know mistakes are sort of unavoidable...

Continue Reading
Calibrate Your CNC Touch Plate For Best Results
By George Vondriska on August 17, 2022

Touch plates, also known as pucks, are commonly used to set the Z-zero on CNC routers. The concept is simple. When the machine is told to do so, the...

Continue Reading
CNC Tips: How to Flycut Wood
By George Vondriska on August 15, 2022

Fly cutting is a very important maintenance task that you need to do, but it can be used for more than just leveling your spoilboard. This burr oak...

Continue Reading

Subscribe and stay up to date