Laguna Blog

Stay Up To Date

Topic: How To

How To Use Grain Filler To Improve Wood Finish
By Paul Mayer on June 13, 2022

When finishing a porous hardwood such as oak or walnut, the open pore structure can cause your final surface to appear coarse and rippled rather than...

Continue Reading
Woodworking Joints For Cabinet Drawers
By Willie Sandry on June 6, 2022

If you build furniture long enough, you’ll encounter a need to build drawer boxes.  Want to tackle a home renovation involving cabinets?  You’ll need...

Continue Reading
CNC: Create Interlocking Joints
By George Vondriska on May 25, 2022

This style of woodworking joint goes by a few different names; cross lap, cross halving, half lap… But no matter what you call it this is a great...

Continue Reading
CNC A Live Edge Desk Tray Organizer
By George Vondriska on May 11, 2022

If you need a little help keeping your desk organized this project is right up your alley. It’ll store your phone, pens, flash drives, SD cards…....

Continue Reading
Make A Bandsaw Crosscut Sled
By Willie Sandry on May 9, 2022

Most serious woodworkers have a crosscut sled for their tablesaw, but do you have a crosscut sled for the bandsaw? They’re a handy accessory that...

Continue Reading
A Step-By-Step Of Sheet Engraving On A CO2 Laser
By Jim Diederich on May 4, 2022

Often times I get orders for small items, but a large quantity. Depending on how many individual items the order is for, I will sometimes make a...

Continue Reading
Dry Your Own Lumber
By Willie Sandry on April 25, 2022

One of the biggest boons to sourcing hardwood lumber has been my lumber kiln. Before having the ability to kiln dry my own lumber, I was reliant on...

Continue Reading
CNC: Feed Through Tiling for Large Projects - Tiling and Machining the Workpiece
By George Vondriska on April 20, 2022

You can easily machine workpieces that are significantly longer than your CNC router by using Feed Through tiling. For the design and toolpath...

Continue Reading
CNC: Feed Through Tiling for Large Projects - Design and Toolpaths
By George Vondriska on April 13, 2022

As you consider projects you want to do on your CNC router remember that your capacity is only limited in one direction, the width of the gantry....

Continue Reading
Turn a Copper and Wood Barrel Bottle Stopper
By Paul Mayer on April 4, 2022

Turning bottle stoppers is highly addictive, and this copper and wood barrel wine bottle stopper is an example of where that rabbit hole can take...

Continue Reading

Subscribe and stay up to date