Laguna Blog

Stay up to date

Subscribe Here!

Finger Joints on your CNC Router

Did you know you can cut finger joints on your CNC router? Here’s what you need to know to make this joint.

Continue Reading
Onion Skinning for Small Parts on Your CNC

Onion skinning, leaving a paper-thin bit of material at the bottom of a profile cut, is a great way to keep small parts secure on a CNC router.

Continue Reading
CNC: Using a Point Roundover Bit

If you’ve ever used a hand-held router or router table you’re probably familiar with roundover bits. They’re great for easing the edges on your...

Continue Reading
VCarve Pro: Importing Router Bit Profiles

Are you using VCarve Pro to design and toolpath your CNC projects? Let’s look at how you can easily import and add router bits to the software’s...

Continue Reading
Zero In On Your Origin

You may have had this experience on your CNC router; you’ve determined the XY origin for your project, and you need to get the spindle directly...

Continue Reading
CNC Hold Down Methods

When you use a hand-held router for your woodworking you get constant feedback on what’s happening. When you “rout” with a CNC, the machine is...

Continue Reading
CNC: Same design, different toolpaths, different look

A really interesting aspect of doing CNC work is creating a design, and then experimenting with different toolpaths to get different results.

Continue Reading
What is a 5-Axis CNC Machine?

Just about everyone associated with manufacturing has heard about 5-axis CNC machines, but it's likely that relatively few of them actually...

Continue Reading
Cutting Small Parts on a CNC Routing Table

The definition of a “small part” will vary from shop to shop, but it’s generally agreed that any part that fits in the palm of the hand is...

Continue Reading
Saving That CNC Carving - Unplanned Re-Carving

How many times has it happened to you? You are finished with your CNC carving and realize the name is spelled wrong or something is not right with...

Continue Reading

Stay up to date