Bowl turning is fun and, here’s a warning, very addictive. Here are some tips that’ll help you turn a large natural edge bowl on your lathe. Check...
Continue ReadingGeorge Vondriska
You may also know George from his work as the Tools and New Products Editor for American Woodworker Magazine, his articles in Fine Woodworking, WOOD, and Woodworkers Journal Magazines, or from his current position as Managing Editor of Woodworkers Guild of America. Find George Vondriska on Instagram @vondriskaworks
Using Your CNC Router As A Plotter
Did you know you can use felt tip markers instead of router bits in your CNC? This allows you to use the CNC as a plotter. No special software is...
Continue ReadingHow To Carve A Pumpkin On A CNC Router
Just in time for Halloween, here’s how to convert pumpkin clipart from the internet to vectors that you can cut on the CNC. And, by choosing...
Continue ReadingMake a Tongue and Groove Door Frame
If you have a router table and a tongue and groove router bit set you can easily make frame and panel doors. It’s a simple process and creates a...
Continue ReadingEasy Drawer Corners with Lock Rabbets
I love using this joint on drawers. It’s so fast! With one set up you’ll cut the corner joint and the groove for the drawer bottom. This works great...
Continue ReadingHow To DIY a CNC Router Woven Frame
It’s easy to add a weave pattern to a frame using VCarve Pro to design your CNC project. There are different weaves available, and you can resize...
Continue ReadingCNC: How To Engrave a Glass Block
CNC routers aren’t just for cutting wood and plastics. You can also use your CNC to engrave, like the dream catcher artwork on this glass block
Continue ReadingGluing Tips and Tricks
If you’re doing woodworking, you’re using glue. Here are some great tips and tricks that’ll help you with your gluing up processes.
Continue ReadingCNC: Make a Custom Plaque
You can easily produce custom plaques on your CNC router. This one will end up on a horse stall. I’m sure Sonny will appreciate it. :) VCarve Pro 10...
Continue ReadingCreate An Epoxy Inlay Using Your CNC
The idea of doing an inlay in your woodworking projects isn’t new, but doing it using epoxy instead of wood as the inlay may be new to you. Here’s...
Continue Reading