Laguna Blog

Stay Up To Date

Five Pen Turning Tips From Brandon Branch
By Paul Mayer on November 15, 2021

Turning pens is a favorite pursuit of many craftsmen for a number of reasons:

Continue Reading
Make A Louvered Tea Light
By Willie Sandry on November 8, 2021

Something about the holidays makes woodworkers get busy in the shop with all sorts of projects. Here’s a quick and easy guide for a handsome...

Continue Reading
Turn a Large Natural Edge Bowl
By George Vondriska on November 3, 2021

Bowl turning is fun and, here’s a warning, very addictive. Here are some tips that’ll help you turn a large natural edge bowl on your lathe. Check...

Continue Reading
Make a Spring Seat Cushion
By Willie Sandry on November 1, 2021

I needed to reupholster a large Stickley rocking chair, and discovered the old seat frame was damaged. So, before I could tackle the upholstery, I...

Continue Reading
Using Your CNC Router As A Plotter
By George Vondriska on October 27, 2021

Did you know you can use felt tip markers instead of router bits in your CNC?  This allows you to use the CNC as a plotter.  No special software...

Continue Reading
Treating Combat Stress with Woodturning
By Paul Mayer on October 25, 2021

All of us who partake in the hobby or profession of woodturning know that there is an undeniable element of relaxation that goes along with it. ...

Continue Reading
Make A River Epoxy Board
By Willie Sandry on October 18, 2021

Here’s a great way to try something new, that you’ve never attempted before. You can get creative with color, and overall layout for just the look...

Continue Reading
How To Carve A Pumpkin On A CNC Router
By George Vondriska on October 13, 2021

Just in time for Halloween, here’s how to convert pumpkin clipart from the internet to vectors that you can cut on the CNC. And, by choosing...

Continue Reading
Choose the Right Dust Collector
By Paul Mayer on October 11, 2021

Breathing wood dust is a known health hazard, so as woodworkers we owe it to ourselves and our families to invest in proper dust collection. There

Continue Reading
Laguna 1412 Bandsaw Plasti-Dip Rubberized Knobs
By Willie Sandry on October 4, 2021

The ceramic guide system is the primary reason I selected the 1412 bandsaw. With 5 ceramic points of contact above the table, and 5 points of...

Continue Reading

Subscribe and stay up to date