Laguna Blog

Stay Up To Date

How to Create a Perfect Stencil with a CNC Router
By George Vondriska on July 20, 2022

Grab a plastic sign from your local hardware store, install a dragknife on your CNC router, and you can easily create your own stencils.

Continue Reading
Why You Need A Crosscut Sled For Your Table Saw: Dual Version
By Willie Sandry on July 19, 2022

The single most used table saw accessory in my shop is a crosscut sled. I named it the X-Cut sled because the cutouts to reduce panel weight resemble...

Continue Reading
How To Build A Cutting Board Out Of Exotic Wood
By Kayla Russell on July 14, 2022

The world of woodworking is vast and full of unlimited possibilities for beginners and seasoned woodworkers alike. That being said, where do you...

Continue Reading
How To Turn Cedar Wood Into A Vase with Resin
By Paul Mayer on July 12, 2022

Dan Preece is a hobbyist woodturner who loves to take on new challenges using carefully selected wood, finished with resin to produce beautiful art...

Continue Reading
DIY Leather Plane Holder Using a CNC Drag Knife
By George Vondriska on July 8, 2022

Now that you know what a Drag Knife is, let’s do a project and put a drag knife to use.  Be sure you follow the recipe in previous article about the...

Continue Reading
How To Make A Spline Box Using Your Tablesaw
By Willie Sandry on July 5, 2022

Make this decorative splined box with only one power tool – a tablesaw!  This figured maple keepsake box features an aromatic cedar bottom, and...

Continue Reading
How To Make a Wine Rack With Your CNC Machine
By George Vondriska on June 28, 2022

Give your bottles of wine a special place by making this wine rack with your CNC router.  It’s made from ½” plywood, has an epoxy accent and relies...

Continue Reading
Five Woodworking Tips for Complex Builds
By Paul Mayer on June 27, 2022

Woodworking glue-ups can be complicated, which causes stress for many woodworkers.  The risk is that you are unable to complete the assembly before...

Continue Reading
How To Use A Drag Knife With A CNC Router
By George Vondriska on June 22, 2022

What’s a Drag Knife? When you think about using your CNC router you probably think about cutting wood, non-ferrous metal, or plastic using a router...

Continue Reading
Five Woodworking Jigs and Fixtures For Bandsaws, Tablesaws, and Routers
By Willie Sandry on June 15, 2022

What are the top jigs and fixtures used in a well-equipped woodshop?  In addition to a solid assortment of quality power tools, you’ll want to...

Continue Reading

Subscribe and stay up to date