Laguna Blog

Stay Up To Date

Topic: Tips Tricks

CNC Project - Spread Some Holiday Joy
By George Vondriska on December 10, 2020

Here’s a great CNC router project you can still kick out in time for the holidays. These are great stocking stuffers, and easy to batch out.

Continue Reading
Power Carve a Spoon Using a Bandsaw and Die Grinder
By Paul Mayer on December 3, 2020

There are a few conversation topics that are inevitable whenever woodworkers get together; “what is your favorite wood species?”, “what is your...

Continue Reading
Finger Joints on your CNC Router
By George Vondriska on November 17, 2020

Did you know you can cut finger joints on your CNC router? Here’s what you need to know to make this joint.

Continue Reading
Onion Skinning for Small Parts on Your CNC
By George Vondriska on November 10, 2020

Onion skinning, leaving a paper-thin bit of material at the bottom of a profile cut, is a great way to keep small parts secure on a CNC router.

Continue Reading
CNC: Using a Point Roundover Bit
By George Vondriska on November 3, 2020

If you’ve ever used a hand-held router or router table you’re probably familiar with roundover bits. They’re great for easing the edges on your...

Continue Reading
The MANY Advantages of a Smaller Diameter Blade on Your Table Saw
By Paul Mayer on October 29, 2020

Most woodworkers own a table saw, and the majority of those saws have a 10” blade installed on them.

Continue Reading
VCarve Pro: Importing Router Bit Profiles
By George Vondriska on October 27, 2020

Are you using VCarve Pro to design and toolpath your CNC projects? Let’s look at how you can easily import and add router bits to the software’s...

Continue Reading
Logs to Lumber on a Bandsaw
By George Vondriska on October 23, 2020

There are plenty of good reasons for mastering this process: Get species you can’t commercially buy. Control the dimensions of your stock. (Great...

Continue Reading
Make a Modern Graduated Strip Cutting Board
By Paul Mayer on October 20, 2020

In the past I ran a business with my father where we sold a variety of wooden products, and one of our all-time best sellers was this contrasting...

Continue Reading
Zero In On Your Origin
By George Vondriska on October 15, 2020

You may have had this experience on your CNC router; you’ve determined the XY origin for your project, and you need to get the spindle directly...

Continue Reading

Subscribe and stay up to date