Laguna Blog

Stay Up To Date

Topic: Tips Tricks

Using Your CNC Router As A Plotter
By George Vondriska on October 27, 2021

Did you know you can use felt tip markers instead of router bits in your CNC?  This allows you to use the CNC as a plotter.  No special software is...

Continue Reading
Choose the Right Dust Collector
By Paul Mayer on October 11, 2021

Breathing wood dust is a known health hazard, so as woodworkers we owe it to ourselves and our families to invest in proper dust collection. There ...

Continue Reading
Laguna 1412 Bandsaw Plasti-Dip Rubberized Knobs
By Willie Sandry on October 4, 2021

The ceramic guide system is the primary reason I selected the 1412 bandsaw. With 5 ceramic points of contact above the table, and 5 points of contact...

Continue Reading
Make a Tongue and Groove Door Frame
By George Vondriska on September 29, 2021

If you have a router table and a tongue and groove router bit set you can easily make frame and panel doors. It’s a simple process and creates a...

Continue Reading
A Better Way to Build a Serving Tray
By Paul Mayer on September 27, 2021

Many years ago I received an order from a client for a serving tray, and she wanted the popular style where you start with a thick plank and dish out...

Continue Reading
Easy Drawer Corners with Lock Rabbets
By George Vondriska on September 15, 2021

I love using this joint on drawers. It’s so fast! With one set up you’ll cut the corner joint and the groove for the drawer bottom. This works great...

Continue Reading
Gluing Tips and Tricks
By George Vondriska on August 25, 2021

If you’re doing woodworking, you’re using glue. Here are some great tips and tricks that’ll help you with your gluing up processes.

Continue Reading
Use A Borescope To Inspect Dust Collection Pipes
By Willie Sandry on August 16, 2021

In a busy woodshop, you’re likely to find a central dust collector with long lengths of piping connecting to various tools. When the ductwork is...

Continue Reading
Create An Epoxy Inlay Using Your CNC
By George Vondriska on August 11, 2021

The idea of doing an inlay in your woodworking projects isn’t new, but doing it using epoxy instead of wood as the inlay may be new to you. Here’s...

Continue Reading
Custom Sacrificial Fence Clamps for Fusion F2 Tablesaw
By Willie Sandry on August 2, 2021

With the type of woodworking I do – building furniture, small cabinets and bookshelves- I often find myself using a dado blade with sacrificial fence...

Continue Reading

Subscribe and stay up to date