Laguna Blog

Stay Up To Date

Topic: Cnc

CNC Hold-Down Strategies
By George Vondriska on November 24, 2021

You’ve got to have your work secured, and secured well, when you’re running your CNC router. You simply can’t take a chance that your work will...

Continue Reading
CNC: Make Custom Bowl Trays
By George Vondriska on November 17, 2021

Fondue is a favorite in my house, which means serving a variety of meats, vegetables and sauces. These custom bowl trays add a very nice touch to the...

Continue Reading
Using Your CNC Router As A Plotter
By George Vondriska on October 27, 2021

Did you know you can use felt tip markers instead of router bits in your CNC?  This allows you to use the CNC as a plotter.  No special software is...

Continue Reading
How To Carve A Pumpkin On A CNC Router
By George Vondriska on October 13, 2021

Just in time for Halloween, here’s how to convert pumpkin clipart from the internet to vectors that you can cut on the CNC. And, by choosing...

Continue Reading
How To DIY a CNC Router Woven Frame
By George Vondriska on September 8, 2021

It’s easy to add a weave pattern to a frame using VCarve Pro to design your CNC project. There are different weaves available, and you can resize...

Continue Reading
CNC: How To Engrave a Glass Block
By George Vondriska on September 1, 2021

CNC routers aren’t just for cutting wood and plastics. You can also use your CNC to engrave, like the dream catcher artwork on this glass block

Continue Reading
CNC: Make a Custom Plaque
By George Vondriska on August 18, 2021

You can easily produce custom plaques on your CNC router. This one will end up on a horse stall. I’m sure Sonny will appreciate it. :)  VCarve Pro 10...

Continue Reading
Adding Fonts To VCarve Pro
By George Vondriska on August 4, 2021

Computers inherently come with a lot of fonts, but if you get into a specialized project you might find that VCarve Pro doesn’t have the font you...

Continue Reading
Level an Epoxy Pour on your CNC
By George Vondriska on June 23, 2021

Working with epoxy is all the rage right now, and it’s common to pour epoxy alongside a piece or two of wood. You can easily level the resulting...

Continue Reading
CNC: How to Fly Cut Your Spoilboard
By George Vondriska on June 9, 2021

The spoilboard on your CNC router is a disposable commodity. Not in the sense that you’ll throw it out and get a new one, but in the sense that your...

Continue Reading

Subscribe and stay up to date