Laguna Blog

Stay Up To Date

Topic: Cnc Technology

CNC: How To Engrave a Glass Block
By George Vondriska on September 1, 2021

CNC routers aren’t just for cutting wood and plastics. You can also use your CNC to engrave, like the dream catcher artwork on this glass block

Continue Reading
CNC: Make a Custom Plaque
By George Vondriska on August 18, 2021

You can easily produce custom plaques on your CNC router. This one will end up on a horse stall. I’m sure Sonny will appreciate it. :)  VCarve Pro...

Continue Reading
Adding Fonts To VCarve Pro
By George Vondriska on August 4, 2021

Computers inherently come with a lot of fonts, but if you get into a specialized project you might find that VCarve Pro doesn’t have the font you...

Continue Reading
Level an Epoxy Pour on your CNC
By George Vondriska on June 23, 2021

Working with epoxy is all the rage right now, and it’s common to pour epoxy alongside a piece or two of wood. You can easily level the resulting...

Continue Reading
Place Text on 3D Artwork
By George Vondriska on March 17, 2021

The beauty of 3D clipart is its complexity. There are few, if any, flat planes. Despite that you can easily personalize 3D clipart by adding text...

Continue Reading
CNC: Cutting 3D Clipart
By George Vondriska on February 4, 2021

3D clipart is a wonderful way to enhance your CNC work. With the correct choice of toolpath and bits you can easily get incredibly detailed...

Continue Reading
Creating a Lithophane with a CNC
By George Vondriska on January 13, 2021

Lithophanes are amazing! What is a lithophane? It’s an etched or carved piece that only shows an image when it’s back lit. In this case, the...

Continue Reading
CNC Project - Spread Some Holiday Joy
By George Vondriska on December 10, 2020

Here’s a great CNC router project you can still kick out in time for the holidays. These are great stocking stuffers, and easy to batch out.

Continue Reading
Finger Joints on your CNC Router
By George Vondriska on November 17, 2020

Did you know you can cut finger joints on your CNC router? Here’s what you need to know to make this joint.

Continue Reading
Onion Skinning for Small Parts on Your CNC
By George Vondriska on November 10, 2020

Onion skinning, leaving a paper-thin bit of material at the bottom of a profile cut, is a great way to keep small parts secure on a CNC router.

Continue Reading

Subscribe and stay up to date