Laguna Blog

Stay Up To Date

Topic: Tips Tricks

Simple Hacks to Common Woodworking Mistakes
By Willie Sandry on August 24, 2022

Sometimes mistakes happen. No matter how careful you are, if you’ve been a woodworker for a while, you know mistakes are sort of unavoidable...

Continue Reading
Calibrate Your CNC Touch Plate For Best Results
By George Vondriska on August 17, 2022

Touch plates, also known as pucks, are commonly used to set the Z-zero on CNC routers. The concept is simple. When the machine is told to do so, the...

Continue Reading
CNC Tips: How to Flycut Wood
By George Vondriska on August 15, 2022

Fly cutting is a very important maintenance task that you need to do, but it can be used for more than just leveling your spoilboard. This burr oak...

Continue Reading
All The Basics About Bandsaw Blades
By Willie Sandry on August 1, 2022

Most woodworkers I know put one blade on the bandsaw and keep it there.  Maybe that’s because they don’t have a good selection of blades, or maybe...

Continue Reading
How to Build Traditional Nightstands
By Paul Mayer on July 25, 2022

I recently built a pair of walnut nightstands for my daughter, these being the first (hopefully, of many) pieces of furniture that are built...

Continue Reading
How to Create a Perfect Stencil with a CNC Router
By George Vondriska on July 20, 2022

Grab a plastic sign from your local hardware store, install a dragknife on your CNC router, and you can easily create your own stencils.

Continue Reading
How To Build A Cutting Board Out Of Exotic Wood
By Kayla Russell on July 14, 2022

The world of woodworking is vast and full of unlimited possibilities for beginners and seasoned woodworkers alike. That being said, where do you...

Continue Reading
How To Turn Cedar Wood Into A Vase with Resin
By Paul Mayer on July 12, 2022

Dan Preece is a hobbyist woodturner who loves to take on new challenges using carefully selected wood, finished with resin to produce beautiful art...

Continue Reading
How To Make A Spline Box Using Your Tablesaw
By Willie Sandry on July 5, 2022

Make this decorative splined box with only one power tool – a tablesaw!  This figured maple keepsake box features an aromatic cedar bottom, and...

Continue Reading
How To Make a Wine Rack With Your CNC Machine
By George Vondriska on June 28, 2022

Give your bottles of wine a special place by making this wine rack with your CNC router.  It’s made from ½” plywood, has an epoxy accent and relies...

Continue Reading

Subscribe and stay up to date